Tips for Maintaining Hydraulic Cylinders to Make Them Last for Several More Years

The key to keeping hydraulic cylinders from breaking down is daily maintenance. Remember these points, and your hydraulic cylinders will last several times longer than others!

First, you have to keep an eye on the hydraulic oil, which is like the blood of the hydraulic cylinder. Check the oil level every week. If the oil is too low, add it quickly, but don't fill it too full. If the color of the oil becomes darker or there are impurities, don't hesitate to replace it with new oil. It is recommended to completely change the oil every 2000 hours or half a year, whichever comes first.

Seals are most likely to have problems. Before starting the machine every time, check if there are any oil stains on the piston rod. If there are, it is probably because the seal ring is aging. Be careful not to scratch the piston rod during normal work, and wipe it clean immediately if it is stained with sand and dust. If you find oil leakage, don't make do with it, and replace the seal quickly.

The inner wall of the cylinder barrel also needs maintenance. If it is not used for a long time, the piston rod should be retracted to the bottom to prevent rust. If you find scratches on the inner wall of the cylinder, it is best to find a professional manufacturer to repair it. If you do it yourself, it may make things worse.

Finally, a reminder that the working environment is very important. Too high or too low temperature is not good for hydraulic cylinders. Try not to work for a long time in extreme weather. If you find that the movement is slow or there is an abnormal sound, stop the machine immediately for inspection. If a small problem is delayed into a big problem, it will be a big loss.

Follow these methods to ensure that your hydraulic cylinder can work for several more years, and the maintenance fee saved is enough to buy several hot pot meals!

As a professional manufacturer and supplier, we provide high-quality products. If you are interested in our products or have any questions, please feel free to contact us.